Protective Coating
Protective coatings are a simple way to reduce corrosion, by limiting the exposure of the metal to a corrosive environment. A protective coating is a layer of material applied to the surface of another material to prevent corrosion. A protective coating can be metallic and non-metallic and are applied by various methods and can be used for many other purposes, in addition to preventing corrosion.
Offshore
Hydrocarbon Industry
Energy
Infra Structures
Mining
PRODUCTS
EPOXY MASTICS
Jotamastic Smart Pack
DFT 50 - 120 µm
Vol - 72
This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller. 1:1 mixing ration for easy use and reduced wastage. Provides long lasting protection in environments with high corrosivity.
EPOXY ZINC PRIMERS
​Barrier 90
DFT 25 - 90 µm
Vol - 53
This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller. 1:1 mixing ration for easy use and reduced wastage. Provides long lasting protection in environments with high corrosivity.
ZINC SILICATE PRIMERS
Resist 86
DFT 50 - 90 µm
Vol - 67
This is a two component moisture cured inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 1 ISO 12944-4 and AS/NZS 3750.15 1994. It is heat resistant up to 540 ËšC. This product complies with ASTM D520 type II zinc dust.
Resist 78
DFT 50 - 90 µm
Vol - 72
​This is a two component moisture cured inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-4. It is heat resistant up to 540 ˚C. This product complies with ASTM D520 type II zinc dust.
EPOXY PRIMERS
Penguard E20
DFT 50 - 175 µm
Vol - 62
This is a two component amine cured epoxy coating. Can be used as an anticorrosive primer or mid coat in atmospheric environments. Specially designed for new construction where fast dry to handle and over coatings are required. Suitable for Flow Coating Application Method.
Penguard Express ZP
DFT 75 - 250 µm
Vol - 74
​This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids and high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
Penguard Express
DFT 75 - 250 µm
Vol - 74
This is two component amine cured epoxy coating. It is a fast drying, high solids and high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
INTERMEDIATE EPOXY MIO
EPOXY TOPCOATS
POLYURETHANE TOPCOATS
ALKYD BASED PRIMER AND TOPCOATS
HEAT RESISTANT PAINTS
Epoxy HR
DFT 100 - 200 µm
Vol - 63
​This is a two component polyamine cured epoxy coating. It is heat resistant up to 200 ˚C and be applied on hot substrates up to 150 ˚C. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for insulated and non-insulated surfaces.